62 series deep groove ball open bearings

Deep groove ball bearings are the most widely used type of rolling bearings. It is characterized by low frictional resistance and high speed. It can be used on parts with radial load or combined load of radial and axial action.

60/ZZ, 2RS, series single row with dust cover, seal type deep groove ball bearing

Deep groove ball bearings are the most widely used type of rolling bearings. It is characterized by low frictional resistance and high speed. It can be used on parts with radial load or combined load of radial and axial action.

F60/ZZ series bearing with flange edge dust cover

Deep groove ball bearings are the most widely used type of rolling bearings. It is characterized by low frictional resistance and high speed. It can be used on parts with radial load or combined load of radial and axial action.

13 ( k ) series self-aligning ball bearings

Double row self-aligning ball bearings, the inner ring has two raceways, the outer ring has a spherical raceway, the center of curvature coincides with the axis of the bearing, and has self-aligning performance.

Single row 70C series angular contact ball bearings

Single row angular contact ball bearings can accommodate radial, axial or combined loads, however, any axial load must be in one direction. It can also bear radial load and axial load at the same time. Can work at higher speeds. The larger the contact angle, the higher the axial load carrying capacity. High-precision and high-speed bearings typically have a 15-degree contact angle.

Original Category VII High Speed Spherical Roller Bearings 230（K) series

Spherical roller bearings are double row self-retaining units consisting of a solid outer ring with concave raceways, a solid inner ring and cylindrical rollers with cages. The inner ring has cylindrical or tapered holes.

Sealed single row tapered roller bearings

Tapered roller bearings are made up of four interdependent components: The inner ring, or cone; the tapered rollers, or rolling elements; the roller retainer, or cage(collectively known as the cone assembly); and an outer race, or cup.

1PCS 19x44 MOCHU miniature U joints UNIVERSAL JOINTS BEARING Universal Joints Crucetas Joints de cardan Cross Chang Jiang 750

First, measure the outside diameters of two adjacent bearings to see if they are the same or different. Locate the diameter(s) in the first column using the smaller diameter first if the bearings are of two sizes.