62 series deep groove ball open bearings

Deep groove ball bearings are the most widely used type of rolling bearings. It is characterized by low frictional resistance and high speed. It can be used on parts with radial load or combined load of radial and axial action.

60 ZZNR 2RSNR series single row with dust cover, seal type deep groove ball bearing

Deep groove ball bearings are the most widely used type of rolling bearings. It is characterized by low frictional resistance and high speed. It can be used on parts with radial load or combined load of radial and axial action.

60 series miniature deep groove ball open bearings

Deep groove ball bearings are the most widely used type of rolling bearings. It is characterized by low frictional resistance and high speed. It can be used on parts with radial load or combined load of radial and axial action.

60/ZZ 2RS series miniature deep groove ball bearings

Deep groove ball bearings are the most widely used type of rolling bearings. It is characterized by low frictional resistance and high speed. It can be used on parts with radial load or combined load of radial and axial action.

12 ( k ) series self-aligning ball bearings

Double row self-aligning ball bearings, the inner ring has two raceways, the outer ring has a spherical raceway, the center of curvature coincides with the axis of the bearing, and has self-aligning performance.

22 ( K ) series self-aligning ball bearings

Double row self-aligning ball bearings, the inner ring has two raceways, the outer ring has a spherical raceway, the center of curvature coincides with the axis of the bearing, and has self-aligning performance.

Thrust Ball Bearing

Thrust ball bearings are classified into those with flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). They can sustain axial loads but no radial loads.

Single row 70C series angular contact ball bearings

Single row angular contact ball bearings can accommodate radial, axial or combined loads, however, any axial load must be in one direction. It can also bear radial load and axial load at the same time. Can work at higher speeds. The larger the contact angle, the higher the axial load carrying capacity. High-precision and high-speed bearings typically have a 15-degree contact angle.